1. Select a ring that fits your finger of choice.
2. Measure the internal diameter of the ring in millimeters.
3. Use the list below to find your ring size:

• Size 5 = 15.7mm
• Size 6 = 16.5mm
• Size 7 = 17.3mm
• Size 8 = 18.1mm
• Size 9 = 18.9mm

1. Wrap a strip of paper around the base of your finger.
2. Mark where the ends meet and measure the length with a ruler.
3. Use this list to convert the measurement to your ring size:

• Size 5 = 49.3mm
• Size 6 = 51.9mm
• Size 7 = 54.4mm
• Size 8 = 57.0mm
• Size 9 = 59.5mm

Some measuring tips:

• Avoid measuring your finger when your body is too cold or hot in temperature. Heat can cause your finger to swell while the cold causes it to shrink. Additionally, exercise, too much salt, alcohol and hormones can make your fingers swell.
• If you are between sizes, go with the larger size.

If you prefer a professional measurement, visit a local jeweler. You can find a jeweler in your area by searching online, reading reviews, or asking for recommendations. At the jeweler, they will measure your finger using a set of ring sizers or a mandrel to ensure an accurate fit.

At Lady Thunder, our standard bracelet sizes are:

• 6 inches
• 7 inches

Use fabric measuring tape wrapped loosely around your wrist to help approximate the size to choose.

At Lady Thunder, our standard necklace sizes are: 

• 16 inches  
• 18 inches
• 20 inches
• 22 inches
• 24 inches

We also make 2 inch extenders if you'd like to add length to an existing necklace.

• 16 inches - Slightly longer than a choker, it usually sits above the collarbone.
• 18 inches - Known as the "Princess" length, it lies at or just above the collarbone.
• 20 inches - Falls a few inches below the collarbone.
• 22 inches - Sits at or near the top of the bust.
• 24 inches - Typically falls at the center of the bust.